SmartBoard SBID-7275P-V2 7000 Pro Series 75-inch Interactive Display with iQ and SMART Meeting Pro

• Type LED
• Aspect ratio 16:9
• Optimal resolution 3840 × 2160 at 60 Hz
• Horizontal frequency 135 kHz
• Vertical frequency 60 Hz
• Contrast ratio (typical) 5000:1
• Brightness (maximum) 360 cd/m²
• Pixel dimensions 0.429 mm × 0.429 mm
• Gamut 72% of NTSC
• Viewing angle 178°
• Response time (typical) 8 ms
• 1000BASE-T Ethernet Two external ports for a four-port 
• Gigabit Ethernet switched network connecting the interactive display
• Audio 10 W integrated speakers (×2)
• Weight 174 lb.
• Power requirements 100V to 240V AC, 50 Hz to 60 Hz

SmartBoard SBID-7275P-V2 7000 Pro Series 75-inch Interactive Display

• Type	7000 Pro Series Display
  Weight	174 lb.
  Hardware
  Touch Technology	HyPr Touch™ (Hybrid Precision Touch) technology
  Multitouch capabilities	Up to 16 simultaneous touch, writing and erase points
  Object Awareness	Behavior adjusts automatically to the tool or object you’re using, whether it’s a pen, finger, eraser or palm.
  Pen ID	Four people can write independently and simultaneously, using different colored ink
  Type	LED
  Aspect ratio	16:09
  Resolution	4K UHD
  Optimal resolution	3840 × 2160 at 60 Hz
  Horizontal frequency (typical)	135 kHz
  Vertical frequency	60 H
  Contrast ratio (typical)	5000:01:00
  Brightness (max)	360 cd/m²
  Pixel dimensions	0.429 mm × 0.429 mm
  Gamut	72% of NTSC
  Viewing angle	178
  Response time (typical)	8 ms
  1000BASE-T Ethernet	Two external ports for a four-port Gigabit Ethernet switched network connecting the interactive display and the iQ appliance to an external network and an external device, such as a computer
  Presence detection	Dual sensors that reduce startup time and power consumption during inactivity
  Audio
  Speakers	10 W integrated speakers (×2)
  Noise level	<30 dBA
  Included cables and accessories	iQ appliance Country-specific power cable USB cable Pen (×4) Eraser
  IQ appliance	Wireless technology: Bluetooth® 4.0 dual mode (backwards compatible with Bluetooth 2.1 + EDR) Capture options: Establish a Bluetooth wireless connection with a supported mobile device (see below) by scanning the interactive display’s unique QR code
  Mounting holes	For a standard VESA® 600 mm × 400 mm mounting plate Lower mounting holes 13 3/4" (35 cm) from the bottom of the interactive display
  Mounting braket depth	Minimum depth of 2" (5.1 cm) for all components on the back of the interactive display for airflow
  Connectors
  Connector panel	OPS slot (for the iQ appliance) Stereo 3.5 mm out S/PDIF out VGA input connectors VGA in Stereo 3.5 mm in USB Type-B HDMI 1 input connectors HDMI 2.0 in USB Type-B Display Port input connectors DisplayPort in USB Type-B USB Type-A3 RJ45 (×2)
  Convenience panel	HDMI 2 input connectors HDMI 1.4 in USB Type-B USB Type-A (×2
  Bottom	AC power in AC power out RS-232 in RS-232 out
  HDCP support	Version 1.4/2.2
  Certification and compliance
  Regulatory certification	EU RED and LV Directives, ISED, cUL, FCC, UL, RCM, CITIC, TRA
  Environmental compliance	REACH, RoHS, WEEE, Battery and Packaging
  U.S.	CONEG Packaging, California Prop 65
  Storage and operating requirements
  Power requirements	100V to 240V AC, 50 Hz to 60 Hz
  Standby mode	<2 W max
  Normal operating	162 W
  Max operating	260 W
  Operating temperature	41–95°F (5–35°C)
  Storage temperature	-4–140°F (-20–60°C)
  Humidity	5–80% relative humidity, non-condensing