secure transactionMartin Yale Powerline 620RC Ream Cutter
The Martin Yale 620RC Ream Cutter has a robust construction and is made using precision components. This heavy duty cutter provides several functions dedicated to accuracy and precision. The Martin Yale 620-RC features a paper clamp that offers additional pressure to your paper stack. This wheel clamp holds even the highest capacity of paper tightly while cutting. With a standardized English and metric ruler, the Martin Yale 620RC helps in accurate cutting.
The Martin Yale 620 Ream Cutter also features an easy to assemble metal stand that ensures that it is a perfect floor machine. It has capacity of 3.14" stack which is approximately 800 sheets of 20 lb. bond paper and cuts a length of 18.5-inches. The 620-RC Martin Yale is an ideal cutter which has an exceptional cutting capacity that makes it useful to fulfill the demanding requirement of small offices.
Capacity sheets 800
Cutting Length inch 18.5
Cutting Height inch 3.14
Cutting Depth inch 18.5
Minimum Cut Length inch 1”
Paper Clamp Yes
Electrical volt Manual
Dimensions W x D x H approx. inch cm 30 x 31.5 x 30 76 x 80 x 76
Popup Text
No Expert Install
$199.00 Expert Install
Installation Service for equipment includes the following:
JTF will schedule an appointment with one person per site. Unless otherwise requested and/or scheduled, the standard practice is to start all installation services within one week the delivery of the hardware to the customer’s location.
Unpacking: JTF will inventory the shipment against the packing list, unpack and install all delivered products.
Setup/Installation: JTF will physically assemble, connect peripherals, network cables, and power cords that were purchased from JTF.
a. This service provides installation of drivers on a single PC workstation (not server), network setup, including the programming of the IP address and network settings and verification of the network functionality, wireless connection setup and verification of the functionality over the Internet.
b. For configuration networking, the Customer can choose between automatic configuration using BOOTCP or Dynamic Host Configuration Protocol (DHCP), or manual configuration with IP address, default gateway, and subnet mask.
c. For multifunction products, the service provides setup of the ‘send to email configuration’ and configuration of the SMTP or LDAP.
d. This service provides the Customer-identified key operator with a basic overview on how to install consumables, plus explanations of basic features and functionality such as drivers, control panel features, embedded Web server, and alerts.
secure transactionFeatured
