HPE StoreFabric SN2410M
- High Density Data Center Switching: The HPE M-series SN2410M Ethernet switch is a ToR data center switch offering two form-factor configurations: a 1U 48 port 25 GbE SFP28 with 8 port 100 GbE QSFP28, or a 1U 48-port 10GbE SFP+ with 8 port 100 GbE QSFP28. | Each switch offers cost-effective options with entry at 24 ports and a pay-as-you grow with a software license offering more flexibility to customers to add capacity when needed. | Each switch delivers 100 GbE ports that may be further split into four 25 GbE ports or support for 40 GbE that can be further split into four 10 GbE. | Each switch delivers data rates from 1 GbE to 100 GbE (1, 10, 25, 40, 100 GbE) providing future-proofing for connectivity options.
- Superior Performance with Future-proof Growth: The HPE M-series SN2410M Ethernet switches deliver predictable and consistent throughput regardless of the packet size being transferred, the mixture of ports which are sending data and even within mixed speed environments. | It provides wire-rate performance with zero packet loss across all frame sizes, avoiding any negative impact on applications that could occur with frame loss as unexpected packet loss is unacceptable in modern data centers, especially within a storage network.
- Enhanced for Demanding Enterprise Data Centers and Storage Environments: The HPE M-series SN2410M switch provides a flexible combination of ports, allowing great flexibility and efficiency, simplifying scale-out environments, and saving on total cost of ownership (TCO). | Enhanced port configuration enables high-speed rack connectivity to the server at 10 GbE or 25 GbE speeds with 100 GbE uplink ports that allow for a variety of blocking ratios that suit specific application requirements.
- Unleash Storage Performance and Improve Flash ROI: The HPE M-series SN2410M switch provides ultra-low latency of under 300 ns port-to-port. This is advantageous for flash storage, which has moved latency bottlenecks from storage access to the network, as well as for the burst nature of today’s software defined and cloud data centers traffic. | The buffering architecture of HPE SN2410M switches provides superior micro burst absorption for applications that burst data at random intervals.
| General Information | |
|---|---|
| Category | Hubs or concentrators |
| Description | HPE StoreFabric SN2410M - Switch - L3 - managed - 48 x 25 Gigabit SFP28 + 8 x 100 Gigabit QSFP28 - rack-mountable - TAA Compliant - for Apollo 4200, 4200 Gen10 |
| Manufacturer | Hewlett Packard Enterprise |
| MSRP | $27,495.00 |
| UNSPSC | 43222610 |
| Main Specifications | |
| Dimensions & Weight / Depth | 43.8 cm |
| Dimensions & Weight / Height | 4.39 cm |
| Dimensions & Weight / Weight | 8.52 kg |
| Dimensions & Weight / Width | 43.6 cm |
| Header / Brand | HPE |
| Miscellaneous / Product Color | Black |
| Networking / Form Factor | Rack-mountable |
| Networking / Ports Qty | 48 |
| Networking / Type | Switch |
| Packaged Quantity | 1 |
| Service & Support / Type | 3-year warranty |
| Compatibility Information | |
| Designed For | HPE Apollo 4200 Gen10 192TB Qumulo Hybrid Node, 4200 Gen10 336TB Archive Node with 25Gb NIC for Qumulo, 4200 Gen10 Qumulo Archive Node, 4200 Gen10 Qumulo Hybrid Node, 4200 Qumulo Hybrid Node |
| Dimensions & Weight | |
| Depth | 43.8 cm |
| Height | 4.39 cm |
| Weight | 8.52 kg |
| Width | 43.6 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 - 85% (non-condensing) |
| Max Operating Temperature | 40 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Interfaces |
|
| General | |
| Authentication Method | RADIUS, TACACS+, LDAP |
| Compliant Standards | X.509 |
| Device Type | Switch - 48 ports - L3 - managed |
| Enclosure Type | Rack-mountable 1U |
| Features | IGMP snooping, port mirroring, store and forward, IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Data Center Bridging Exchange (DCBX) support, Access Control List (ACL) support, Quality of Service (QoS), Bidirectional Forwarding Detection (BFD), IPv4 support, LLDP support, DHCP relay, sFlow v5, 802.1x authentication, 16MB packet buffer, OpenFlow support, Protocol-based VLANs support, Storm Control, RDMA over Converged Ethernet (RoCE), random early detection (RED), Explicit Congestion Notification (ECN), Priority-Based Flow Control (PFC), Virtual Extensible LAN (VXLAN), Multi Chassis Link Aggregation Group (MLAG), Open Shortest Path First (OSPF), Root Guard, Loop Guard, Voice VLAN, Top-of-Rack (ToR), STP BPDU Guard, BPDU Filter, Protocol Independent Multicast (PIM), hot swap fan tray |
| Flash Memory | 32 MB |
| Performance |
|
| Ports | 48 x 25 Gigabit SFP28 + 8 x 100 Gigabit QSFP28 |
| RAM | 8 GB |
| Remote Management Protocol | SNMP, Telnet, SSH, CLI |
| Status Indicators | System, status, fan |
| Subtype | 25 Gigabit Ethernet |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - parts and labor - 3 years - on-site |
| Miscellaneous | |
| Cables Included | 1 x serial cable |
| Compliant Standards | EMC, FIPS 140-2, X.509, EN 61000-4-5:2006, EN 61000-4-11:2004, UL 60950-1:2007, EN 61000-3-3:2013, EN 55024:2010, EN 61000-4-3:2006+A1:2008+A2:2010, EN 61000-4-6:2014, EN 61000-3-2:2014, IEC60950-1:2005, Second edition + Am1:2009 + Am2:2013, VCCI V-3/2015.04 Class A, EN 55032:2012 Class A, ICES-003:2016 issue 6 Class A, LV, TR CU 020/2011, TR CU 004/2011, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+AC:2011+A2:2013, CAN/CSA C22.2 No. 60950-1:2007+A1:2011+A2:2014, DSTU EN 55032:2014, DSTU EN 60950-1:2014, EN 61000-4-2:2002, EN 61000-4-4:2004+A1:2010, FCC CFR47 Part 15 B 2017 Class A, AS/NZS CISPR32:2015 Class A, KN22:2009 Class A, KN24:2009 |
| Included Accessories | 2 power cords (C13 to C14), 4 intake fan trays, fixed rack mount kit, 2 x PSU cable retainer kit |
| Rack Mounting Kit | Included |
| TAA Compliant | Yes |
| Power | |
| Features | Port-to-power airflow |
| Installed Qty | 2 |
| Max Supported Qty | 2 |
| Power Consumption Operational | 165 Watt |
| Power Device | Internal power supply - hot-plug |
| Power Provided | 460 Watt |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
| Voltage Required | AC 120/230 V (50/60 Hz) |
Onsite Service
Following your purchase, JTF will assign an authorized service partner in your area to your account. Your service calls are processed and dispatched in just minutes after they are received, thus minimizing your downtimes. All service partners are authorized, factory trained and 100% endorsed by JTF Network Partners, with over 600 service dealers nationwide*
Same Day Onsite Service:
Same Day Service is provided at your business or home during the contracted Maintenance period.
Exceptions:
1) Your offices are 40 miles away from the closest service providers.
2) Service in HI, AK & PR.
Convenient Assistance:
Having device issues?
Experts are here 8am -6pm weekly to help solve your technical problems.
Fast, free replacements:
If we can’t fix your printer, we’ll try to replace it by the next business day.
No hidden fees:
Parts and labor, replacements, even return shipping — it’s all covered by your JTF Warranty.
Optional extra coverage:
Additional coverage to include supplies are available for purchase.
No Expert Install
$599.00 Expert Install
Installation Service for equipment includes the following:
JTF will schedule an appointment with one person per site. Unless otherwise requested and/or scheduled, the standard practice is to start all installation services within one week the delivery of the hardware to the customer’s location.
Unpacking: JTF will inventory the shipment against the packing list, unpack and install all delivered products.
Setup/Installation: JTF will physically assemble, connect peripherals, network cables, and power cords that were purchased from JTF.
a. This service provides installation of drivers on a single PC workstation (not server), network setup, including the programming of the IP address and network settings and verification of the network functionality, wireless connection setup and verification of the functionality over the Internet.
b. For configuration networking, the Customer can choose between automatic configuration using BOOTCP or Dynamic Host Configuration Protocol (DHCP), or manual configuration with IP address, default gateway, and subnet mask.
c. For multifunction products, the service provides setup of the ‘send to email configuration’ and configuration of the SMTP or LDAP.
d. This service provides the Customer-identified key operator with a basic overview on how to install consumables, plus explanations of basic features and functionality such as drivers, control panel features, embedded Web server, and alerts.
secure transaction
Quick Details
- Switch
- L3
- managed
- 48 x 25 Gigabit SFP28 + 8 x 100 Gigabit QSFP28
- rack-mountable
