HPE SN2010M 25GbE 18SFP28 4QSFP28 Switch
- Unleash Storage Performance and Improve Flash ROI: The HPE M-series SN2010M Ethernet Switch is a half-width 10/25 GbE and 40/100 GbE Ethernet switch designed for primary, secondary storage, and hyper converged infrastructures. This ToR solution packs 18-ports of 10/25 GbE and 4-ports of 40/100 GbE that can be reconfigured with breakout cables. | It delivers low latency for 10/25 GbE and 40/100 GbE switching, featuring a robust implementation of data, control and management planes, and offers a compact form factor and low power consumption. | It provides ultra-low latency of under 300 ns port-to-port. This is advantageous for flash storage which has moved latency bottlenecks from storage access to the network, as well as for the burst nature of today’s software-defined and cloud data centers traffic. | The buffering architecture provides superior micro-burst absorption for applications that experience data surges across different parts of the network at random intervals.
- Ideal for Demanding Enterprise Data Centers and Storage Environments: The HPE M-series SN2010M Switch provides a flexible combination of ports, allowing for great flexibility, efficiency, and simplification of scale-out environments, saving on total cost of ownership. | Unique port configurations allow high-speed rack connectivity to the server at 1/10 GbE or 25 GbE speeds with 40/100 GbE uplink ports that allow for a variety of blocking ratios that suit specific application requirements. | Enhanced for RDMA over Converged Ethernet (RoCE), full buffer utilization, and zero packet loss combined into a small form factor with low latency make it the ideal switch for the Ethernet storage fabric (ESF).
- Enhanced for Storage and Hyper Converged Environments: The HPE M-series SN2010M Switch provides high port density in a single rack unit, allowing for increased capacity and efficiency, simplifying scale-out environments and saving on total cost of ownership. | With its unique half-width form factor and port counts, this Ethernet switch allows for two HPE SN2010M Switch units to be deployed side-by-side allowing for increased density and high-availability in a single rack unit, making it the ideal ToR switch. | Designed to use less electric power than competing switches, the HPE SN2010M provides one of the industry’s lowest power draws, producing less heat than competing products and reducing operating expenses. | Distributed storage, hyper-converged, analytic, and database solutions require the ability to scale out without compromising performance or high availability. The SN2010M is a great fit for these environments with a mix of 10/25 GbE and 40/100 GbE ports that are designed for zero packet loss. | High throughput, low latency, and active-active network switching capabilities are crucial when deploying clustered servers and storage. It can deliver connectivity to many clients plus 40/100GbE connectivity to selected servers, storage systems or network uplinks, and all with low latency.
- Superior Performance with Future-proof Growth: The HPE M-series SN2010M Switch provides predictability within a storage network with consistent throughput regardless of the packet size being transferred, or the mixture of ports which are sending data, even within mixed speed environments. | It provides wire-rate performance with zero packet loss across frame sizes and avoids any negative impact on applications that could occur with frame loss; in addition to transferring data across both Layer 2 and Layer 3 networks. | Can be deployed to support 1/10 GbE ports and designed to evolve over time to support 25 GbE speeds with uplink ports at 40/100 GbE speeds. This helps protect your network investment and allows for implementing significant speed upgrades to the architecture over time.
| General Information | |
|---|---|
| Category | Network switches |
| Description | HPE SN2010M 25GbE 18SFP28 4QSFP28 Switch - M-Series - switch - half width - L3 - managed - 18 x 1/10/25 Gigabit SFP28 + 4 x 40 Gigabit / 100 Gigabit QSFP28 - back to front airflow - rack-mountable |
| Manufacturer | Hewlett Packard Enterprise |
| MSRP | $12,980.00 |
| UNSPSC | 43222612 |
| Main Specifications | |
| Dimensions & Weight / Depth | 50.8 cm |
| Dimensions & Weight / Height | 4.39 cm |
| Dimensions & Weight / Weight | 4.5 kg |
| Dimensions & Weight / Width | 20 cm |
| Header / Brand | HPE |
| Header / Country Kits | United States |
| Header / Localization | English |
| Miscellaneous / Product Color |
|
| Networking / Form Factor | Rack-mountable |
| Networking / Ports Qty | 18 |
| Networking / Type | Switch |
| Packaged Quantity | 1 |
| Service & Support / Type | 3-year warranty |
| System Requirements / OS Required |
|
| Dimensions & Weight | |
| Depth | 50.8 cm |
| Height | 4.39 cm |
| Weight | 4.5 kg |
| Width | 20 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 - 85% (non-condensing) |
| Max Operating Temperature | 40 °C |
| Max Storage Temperature | 70 °C |
| Min Operating Temperature | 0 °C |
| Min Storage Temperature | -40 °C |
| Expansion / Connectivity | |
| Interfaces |
|
| General | |
| Authentication Method | RADIUS, TACACS+ |
| Built-in Devices | 16 GB SSD |
| Capacity | Packet buffer size: 16 MB |
| Compliant Standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.3ad (LACP), IEEE 802.3ba, IEEE 802.3x, IEEE 802.3ae |
| Device Type | Switch - 18 ports - L3 - managed |
| Enclosure Type | Back to front airflow rack-mountable 1U |
| Features | ToR, EoR, flow control, VLAN support, store and forward, cut-through, QoS, LACP support, LLDP support, BFD, RoCE v2, VRF, DHCP relay, PTP, ECN, OSPF, VXLAN, EVPN, ERSPAN, PIM, BPDU Guard, MLAG, PFC, IGMP snooping, IP-routing |
| Jumbo Frame Support | Yes |
| Performance |
|
| Ports | 18 x 1/10/25 Gigabit SFP28 + 4 x 40 Gigabit / 100 Gigabit QSFP28 |
| RAM | 8 GB |
| Remote Management Protocol | SNMP 1, SNMP 2, Telnet, SNMP 3, TFTP, SSH-2, CLI, SCP, DHCP, JSON, LDAP |
| Routing Protocol | BGP-4, BGP, IGMP, OSPFv2, PIM-SM, PIM-SSM, ECMP, BGP-MP |
| Subtype | 25 Gigabit Ethernet |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - parts and labor - 3 years - on-site |
| Miscellaneous | |
| Compliant Standards | CB, cTUVus, CU, S Mark, FCC, VCCI, ICES, RCM, BSMI, KCC, RoHS |
| Localization | English / United States |
| Power | |
| Features | Power-to-port airflow |
| Installed Qty | 2 |
| Max Supported Qty | 2 |
| Power Consumption Operational | 66 Watt |
| Power Device | Internal power supply |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
| Voltage Required | AC 100-264 V (50/60 Hz) |
| Software / System Requirements | |
| OS Required | HPE ONYX, ONIE |
Onsite Service
Following your purchase, JTF will assign an authorized service partner in your area to your account. Your service calls are processed and dispatched in just minutes after they are received, thus minimizing your downtimes. All service partners are authorized, factory trained and 100% endorsed by JTF Network Partners, with over 600 service dealers nationwide*
Same Day Onsite Service:
Same Day Service is provided at your business or home during the contracted Maintenance period.
Exceptions:
1) Your offices are 40 miles away from the closest service providers.
2) Service in HI, AK & PR.
Convenient Assistance:
Having device issues?
Experts are here 8am -6pm weekly to help solve your technical problems.
Fast, free replacements:
If we can’t fix your printer, we’ll try to replace it by the next business day.
No hidden fees:
Parts and labor, replacements, even return shipping — it’s all covered by your JTF Warranty.
Optional extra coverage:
Additional coverage to include supplies are available for purchase.
No Expert Install
$349.00 Expert Install
Installation Service for equipment includes the following:
JTF will schedule an appointment with one person per site. Unless otherwise requested and/or scheduled, the standard practice is to start all installation services within one week the delivery of the hardware to the customer’s location.
Unpacking: JTF will inventory the shipment against the packing list, unpack and install all delivered products.
Setup/Installation: JTF will physically assemble, connect peripherals, network cables, and power cords that were purchased from JTF.
a. This service provides installation of drivers on a single PC workstation (not server), network setup, including the programming of the IP address and network settings and verification of the network functionality, wireless connection setup and verification of the functionality over the Internet.
b. For configuration networking, the Customer can choose between automatic configuration using BOOTCP or Dynamic Host Configuration Protocol (DHCP), or manual configuration with IP address, default gateway, and subnet mask.
c. For multifunction products, the service provides setup of the ‘send to email configuration’ and configuration of the SMTP or LDAP.
d. This service provides the Customer-identified key operator with a basic overview on how to install consumables, plus explanations of basic features and functionality such as drivers, control panel features, embedded Web server, and alerts.
secure transaction
Quick Details
- M-Series
- switch
- half width
- L3
- managed
