HPE Networking Comware 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 770W

The HPE Networking Comware 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 770W is designed to efficiently handle a variety of networking environments. With a switching capacity of 176 Gbps and the ability to support up to 48 ports of 10/100/1000Base-T PoE+, it provides robust performance to meet the needs of enterprise networks. The switch also features advanced capabilities such as IPv4 and IPv6 dual stack, Quality of Service (QoS), and Intelligent Resilient Fabric Technology (IRF), ensuring efficient data transmission and increased network reliability. This switch is built to manage an array of devices with its extensive IPv4 host and ARP table supporting 1500 entries. Furthermore, it offers a packet buffer size of 1.5 MB to enhance its capability to handle high traffic loads while maintaining optimal performance. The device is equipped with both CLI and SNMP technologies for remote management, allowing for easier network administration and monitoring. Whether you are connecting multiple devices or scaling your network, the HPE Networking Comware 2150 meets both performance and management needs.

• Enterprise-class, fully managed, stackable Layer 3 switch series with 8‑, 16‑, 24‑, and 48‑port Class 4 PoE and non‑PoE models, four 1G/10G SFP+ uplinks, and up to 770W of Class 4 PoE:
• Up to 176 Gbps in nonblocking bandwidth, 130 Mpps in forwarding, and up to 9‑switch IRF stack:
• Flexible connectivity options with four 1G/10G SFP+ uplinks in the 16‑, 24‑, and 48‑port models and two 1G SFP and two 1G/10G SFP+ uplinks in the 8‑port model:
• Advanced Quality of Service (QoS), IPv6, and dynamic L3 protocols (RIP and OSPF) for reliable connectivity:
• Fanless design in the 8‑port and 24‑/48‑port non‑PoE models. Supports IEEE 802.3az standard for Energy Efficient Ethernet (EEE):
• Managed by Web GUI, CLI, Smart Management Center (SmartMC) web dashboard, HPE Intelligent Management Center (IMC), SNMP, and REST APIs:
• Enterprise-class secure and reliable connectivity: The HPE Networking CW 2150 Switch Series delivers up to 176 Gbps of nonblocking bandwidth and up to 131 Mpps forwarding, with nine unit IRF stacking for resilient availability and link redundancy. | The CW 2150 series offers flexible connectivity with four 1G/10G SFP+ uplinks on the 16, 24, and 48 port models, and two 1G SFP plus two 1G/10G SFP+ uplinks on the 8 port model. The 24 port model adds four SFP combo ports. | Advanced Quality of Service (QoS), Internet Protocol version 6 (IPv6) and dynamic L3 protocols (RIP and OSPF) for reliable connectivity | It supports IEEE 802.3az Energy Efficient Ethernet and offers a fanless design on the 8‑, 24‑, and 48‑port non‑PoE models. | Built‑in 6 kV service‑port surge protection helps reduce the risk of power strikes in demanding environments such as construction sites.
• Powerful PoE capabilities: The HPE Networking CW 2150 Switch Series provides 125 W, 248 W, 405 W, 390 W, and 770 W Class 4 PoE across the 8‑, 16‑, 24‑, and 48‑port models. | It supports advanced PoE features, including fast PoE that delivers power within seconds of system startup. | Perpetual PoE supports end‑device state monitoring to help maintain power during a power‑source reboot. | The PoE Watchdog function automatically removes power from a port when the connected device is no longer active.
• Comprehensive security control: The HPE Networking CW 2150 Switch Series provides security features and network management for modern SMB environments. Secure boot verifies digital signatures to help prevent unauthorized or malicious software from loading at startup. | With HPE IMC, the CW 2150 series supports EAD by integrating terminal‑security policies, network‑access control, and access‑rights enforcement into a unified security framework. | It delivers multi‑layer access protection with granular ACLs (IPv4/IPv6, VLAN, port‑based), identity‑driven policies, and authentication options including 802.1X, MAC, Web, RADIUS, TACACS+, plus Guest VLAN detection and dual‑NIC detection with IMC. | The CW 2150 series provides encrypted access using SSHv2, SSL, SNMPv3, and TLS, along with role‑based privileges and audit logging. | Threat‑prevention features include Control Plane Policing (DoS protection), ARP and DHCP protection, ICMP throttling, port security, and source‑port filtering.
• Simple and flexible management: The HPE Networking CW 2150 Switch Series offers Web GUI, industry‑standard CLI management and can be managed with other CW switches through a built-in dashboard for simplified deployment and centralized management. | Advanced management options include HPE Intelligent Management Center (IMC), HPE Networking Management Software (AirWave), SNMP managers, and REST APIs for integration with existing customer dashboards.