HPE Aruba Networking AP-575EX (ID)
- Class 1 Division 2 and ATEX Zone 2 certified outdoor Wi-Fi 6 access points provide up to 2.69 Gbps maximum aggregate data rate:
- Purpose built for hazardous locations and to survive in some of the harshest outdoor environments and extreme temperatures (-40˚C to +65˚C):
- Provides policy enforcement for wireless traffic through dynamic segmentation:
- Ready for Internet of Things (IoT) with a built-in Bluetooth 5 and 802.15.4 radio that supports Zigbee:
- Client and RF optimization to match clients with the best available access point and reduce coverage gaps:
- Dynamic segmentation and policy enforcement firewalls automatically enforces consistent policies across networks, keeping users and devices secure:
- Ruggedized Outdoor Wi-Fi 6: HPE Aruba Networking 570EX Series Hazardous Location Access Points provide Class 1 Division 2 and ATEX Zone 2 certification to operate in hazardous locations and provide up to 2.69 Gbps combined peak data rate. It provides high-performance wireless connectivity for outdoor hazardous locations. | The series supports the Wi-Fi 6 standard, including features such as orthogonal frequency-division multiple access (OFDMA), bi-directional multi-user MIMO (MU-MIMO), and target wait time (TWT). | It offers enhanced wireless experience with HPE Aruba Networking ClientMatch technology that removes sticky client issues by steering a client to the AP where it receives a good radio signal.
- Deploy In Hazardous Locations: HPE Aruba Networking 570EX Series Hazardous Location Access Points are purpose-built to survive in some of the harshest outdoor hazardous locations and can withstand extreme temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. | Weatherproof and temperature hardened, this series can handle temperatures ranging from -40˚C to +65˚C, including full sun deployments. | The series is Class 1 Division 2 and ATEX Zone 2 certified for the most extreme indoor and outdoor areas with ignitable concentrations of flammable gases, vapors, or liquids.
- IoT Ready: HPE Aruba Networking 570EX Series Hazardous Location Access Points can serve as IoT platforms that bolster network security and provide coverage for a range of IoT devices without the need for network overlays. | Supports Bluetooth 5 and Zigbee wireless protocols through an integrated IoT radio, and third-party expansion with an integrated USB port. | Target wake time (TWT) improves battery life of IoT devices. | HPE Aruba Networking Central Client Insights uses deep packet inspection to provide additional context and behavioral information that help verify devices are receiving proper policy enforcement and continuously monitor for rogue devices.
- Enhanced Security: HPE Aruba Networking 570EX Series Hazardous Location Access Points offer enhanced security with dynamic segmentation to remove time-consuming and error-prone task of managing complex and static VLANs, ACLs, and subnets by dynamically assigning policies and keeping traffic protected and separated. | The 570EX series offers stronger encryption and authentication with WPA3, protected credentials/keys storage for guest access with Enhanced Open, and user and IoT access policy enforcement firewalls (PEFs). | It simplifies policy enforcement by using a PEF to encapsulate traffic from the AP to the gateway (or mobility controller) for end-to-end encryption and inspection. | For enhanced device assurance, HPE Aruba Networking APs include an installed trusted platform module (TPM).
| General Information | |
|---|---|
| Category | Wireless access point |
| Description | HPE Aruba Networking AP-575EX (ID) - Hazardous Location - wireless access point - Wi-Fi 6 - ZigBee, Bluetooth - 2.4 GHz, 5 GHz - BTO |
| Manufacturer | Hewlett Packard Enterprise |
| UNSPSC | 43222640 |
| Main Specifications | |
| Dimensions & Weight / Depth | 24 cm |
| Dimensions & Weight / Height | 27 cm |
| Dimensions & Weight / Weight | 2.5 kg |
| Dimensions & Weight / Width | 24 cm |
| Header / Brand | HPE |
| Miscellaneous / Product Color | White |
| Networking / Connectivity Technology | Wireless |
| Networking / Data Link Protocol |
|
| Networking / Data Transfer Rate | 4.8 Gbps |
| Networking / Form Factor | External |
| Networking / Type | Wireless access point |
| Packaged Quantity | 1 |
| Service & Support / Type | Limited lifetime warranty |
| System Requirements / OS Required |
|
| Antenna | |
| Antenna | Internal |
| Antenna Qty | 2 |
| Directivity | Omni-directional |
| Environmental Parameters | |
| Humidity Range Operating | 5 - 93% (non-condensing) |
| Max Operating Temperature | 65 °C |
| Min Operating Temperature | -40 °C |
| Expansion / Connectivity | |
| Interfaces |
|
| General | |
| Depth | 24 cm |
| Device Type | Wireless access point |
| Height | 27 cm |
| Ruggedized Design | Outdoor |
| Weight | 2.5 kg |
| Width | 24 cm |
| Internet of Things (IoT) | |
| Communications Technology | Bluetooth, Zigbee |
| Internet of Things (IoT) Compatible | Yes |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - lifetime |
| Miscellaneous | |
| Compliant Standards | FCC, EN 60601-1-2, IP67, IP66, EN 60601-1-1, HAZLOC, EMC 2014/30/EU, CE/EMC, ISED, IEC/EN/UL 60950, ETSI 300 019-2-4, RED 2014/53/EU |
| Pricing Type | BTO |
| Networking | |
| Capacity |
|
| Compliant Standards | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2, IEEE 802.3bz, IEEE 802.11ax, Wi-Fi CERTIFIED 6, Wi-Fi CERTIFIED |
| Connectivity Technology | Wireless |
| Data Link Protocol | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, ZigBee, IEEE 802.11ac Wave 2, Bluetooth 5.0, IEEE 802.11ax (Wi-Fi 6) |
| Data Transfer Rate | 4.8 Gbps |
| Encryption Algorithm | WPA3-Enhanced Open, WPA2-MPSK, SSL |
| Features | Trusted Platform Module (TPM), Maximum Ratio Combining (MRC), Low Density Parity Check (LDPC), Transmit Beam-forming (TxBF) ready, Direct Sequence Spread Spectrum (DSSS), Cyclic Delay Diversity (CDD), Space Time Blocking Code (STBC), Advanced Cellular Coexistence (ACC), ClientMatch, cyclic shift diversity (CSD), MU-MIMO technology, remote VPN tunnel mode, Intelligent Power Monitoring (IPM), 4x4 MU-MIMO technology, Orthogonal Frequency Division Multiple Access (OFDMA), Target Wait Time (TWT) |
| Form Factor | External |
| Frequency Band | 2.4 GHz, 5 GHz |
| Line Coding Format | CCK, 64 QAM, 256 QAM, BPSK, QPSK, 16 QAM, 1024 QAM, OFDMA, OFDM |
| Performance |
|
| Spread Spectrum Method | DSSS, OFDM, OFDMA |
| Status Indicators | System, status |
| Power | |
| Power Over Ethernet (PoE) Supported | PoE |
| Software / System Requirements | |
| OS Required | ArubaOS, InstantOS 8.7.0.0 |
Onsite Service
Following your purchase, JTF will assign an authorized service partner in your area to your account. Your service calls are processed and dispatched in just minutes after they are received, thus minimizing your downtimes. All service partners are authorized, factory trained and 100% endorsed by JTF Network Partners, with over 600 service dealers nationwide*
Same Day Onsite Service:
Same Day Service is provided at your business or home during the contracted Maintenance period.
Exceptions:
1) Your offices are 40 miles away from the closest service providers.
2) Service in HI, AK & PR.
Convenient Assistance:
Having device issues?
Experts are here 8am -6pm weekly to help solve your technical problems.
Fast, free replacements:
If we can’t fix your printer, we’ll try to replace it by the next business day.
No hidden fees:
Parts and labor, replacements, even return shipping — it’s all covered by your JTF Warranty.
Optional extra coverage:
Additional coverage to include supplies are available for purchase.
No Expert Install
$349.00 Expert Install
Installation Service for equipment includes the following:
JTF will schedule an appointment with one person per site. Unless otherwise requested and/or scheduled, the standard practice is to start all installation services within one week the delivery of the hardware to the customer’s location.
Unpacking: JTF will inventory the shipment against the packing list, unpack and install all delivered products.
Setup/Installation: JTF will physically assemble, connect peripherals, network cables, and power cords that were purchased from JTF.
a. This service provides installation of drivers on a single PC workstation (not server), network setup, including the programming of the IP address and network settings and verification of the network functionality, wireless connection setup and verification of the functionality over the Internet.
b. For configuration networking, the Customer can choose between automatic configuration using BOOTCP or Dynamic Host Configuration Protocol (DHCP), or manual configuration with IP address, default gateway, and subnet mask.
c. For multifunction products, the service provides setup of the ‘send to email configuration’ and configuration of the SMTP or LDAP.
d. This service provides the Customer-identified key operator with a basic overview on how to install consumables, plus explanations of basic features and functionality such as drivers, control panel features, embedded Web server, and alerts.
secure transaction
Quick Details
- Hazardous Location
- wireless access point
- Wi-Fi 6
- ZigBee, Bluetooth
- 2.4 GHz, 5 GHz
