HPE Aruba CX 9300-32D 32xQSFP-DD 400G 2xSFP+ 10G Switch
- The switch series provides high performance switching up to 25.6 Tbps in a 1U fixed configuration supporting 32 ports of 100/400GbE:
- Dynamic VXLAN with BGP-EVPN for deep segmentation in data center and campus networks:
- The CX 9300S 32p QSFP28 100G 8p QSFP-DD 400G back-to-front and front-to-back bundles along with new compatible transceivers and power supply options:
- HPE Aruba Networking CX 9300 Switch Series is based on AOS-CX, a modern, database-driven operating system that automates and simplifies many critical and complex network tasks:
- HPE Aruba Networking Fabric Composer greatly simplifies the automation, orchestration, and end-to-end visibility of the network fabric underlay and virtualized overlay.:
- Advanced Layer 2/3 feature set includes BGP, OSPF, VRF-Lite, and IPv6:
- High performance and scale: The HPE Aruba Networking CX 9300 Switch Series meets the modern demands of large-scale virtualized and cloud networks. Provides flexible, cost-effective, high-density 100/400GbE for servers, storage, and intra-fabric connectivity. | The HPE Aruba Networking CX 9300 Switch Series with breakout cabling scalability allows a single 200GbE split into two 100GbE links, 100GbE ports can breakout to four 25GbE ports linking one switch port and accommodating up to four adapter cards in servers or other subsystems. | The HPE Aruba Networking CX 9300 Switch Series eases transition from 10GbE and 25GbE to 100GbE/400GbE providing higher scaling with reduced power and a smaller footprint. 400 Gbps port can be configured as 4 x 100GbE, 2 x 200GbE, or 1 x 400GbE.
- Ethernet storage fabric optimized: The HPE Aruba Networking CX 9300 Switch Series enables low-latency and “lossless” network quality of service (QoS) and connectivity characteristics that storage requires. | Ideal for software-defined storage and HCI solutions, where multiple servers share captive (SSD/flash-based) storage resources. | Ideal solution for data center, cloud, and storage use cases that support top-of‑rack server and storage connectivity and scale-out leaf‑spine fabrics.
- Intelligent analytics: HPE Aruba Networking Network Analytics Engine (NAE) provides the ability to monitor and troubleshoot the network, system, application and security related issues easily, through simple Python agents and REST APIs. | Intelligent pre-processing of data turns raw telemetry into actionable insights. | HPE Aruba Networking Switch Multi-Edit Software support automated configuration and verification.
- High performance and high availability: The HPE Aruba Networking Virtual Switching Extension (VSX) is a high availability technology designed from the ground up to deliver continuous availability, virtualization, and simplicity requirements. Redundant and hot-swappable power supplies and fans provide additional resiliency. | HPE Aruba Networking CX 9300 Switch Series delivers advanced Layer 2/3 feature set includes BGP, OSPF, VRF-Lite, and IPv6. The switch series supports dynamic VXLAN with BGP-EVPN for deep segmentation in data center and campus networks.
| General Information | |
|---|---|
| Category | Network switches |
| Description | HPE Aruba CX 9300-32D 32xQSFP-DD 400G 2xSFP+ 10G Switch - Switch - L3 - managed - 32 x 100/200/400 Gigabit QSFP-DD + 2 x 1 Gigabit / 10 Gigabit SFP+ - front to back airflow - rack-mountable |
| Manufacturer | Hewlett Packard Enterprise |
| MSRP | $119,995.00 |
| UNSPSC | 43222612 |
| Main Specifications | |
| Dimensions & Weight / Depth | 59 cm |
| Dimensions & Weight / Height | 4.35 cm |
| Dimensions & Weight / Weight | 11.85 kg |
| Dimensions & Weight / Width | 43.84 cm |
| Header / Brand | Aruba |
| Miscellaneous / Product Color | Black |
| Networking / Form Factor | Rack-mountable |
| Networking / Ports Qty | 32 |
| Networking / Type | Switch |
| Packaged Quantity | 1 |
| Service & Support / Type | Limited lifetime warranty |
| Dimensions & Weight | |
| Depth | 59 cm |
| Height | 4.35 cm |
| Weight | 11.85 kg |
| Width | 43.84 cm |
| Environmental Parameters | |
| Max Operating Temperature | 45 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Interfaces |
|
| General | |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s |
| Device Type | Switch - 32 ports - L3 - managed |
| Enclosure Type | Front to back airflow rack-mountable 1U |
| Features | sFlow, VRRP support, DCBX support, BFD, Rapid PVST+, ERPS, PFC, VXLAN, Cisco IPSLA, ETS, VSX, UDLD |
| Flash Memory | 128 GB |
| Performance |
|
| Ports | 32 x 100/200/400 Gigabit QSFP-DD + 2 x 1 Gigabit / 10 Gigabit SFP+ |
| Processor | 1: 1.7 GHz |
| RAM | 32 GB SDRAM |
| Remote Management Protocol | SNMP 3, SNMP 2c |
| Routing Protocol | OSPF, BGP-4, RIP-2, BGP, OSPFv3, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), RIPng |
| Subtype | 100 Gigabit Ethernet |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - lifetime |
| Miscellaneous | |
| Included Accessories | 6 fan trays, 2-Post Rack Kit |
| Rack Mounting Kit | Included |
| Power | |
| Installed Qty | 2 |
| Max Supported Qty | 2 |
| Power Consumption Stand by | 210 Watt |
| Power Device | Internal power supply - hot-plug |
| Power Redundancy | Yes |
| Power Redundancy Scheme | N+1 |
| Voltage Required | AC 100-127/200-240 V (50/60 Hz) |
Onsite Service
Following your purchase, JTF will assign an authorized service partner in your area to your account. Your service calls are processed and dispatched in just minutes after they are received, thus minimizing your downtimes. All service partners are authorized, factory trained and 100% endorsed by JTF Network Partners, with over 600 service dealers nationwide*
Same Day Onsite Service:
Same Day Service is provided at your business or home during the contracted Maintenance period.
Exceptions:
1) Your offices are 40 miles away from the closest service providers.
2) Service in HI, AK & PR.
Convenient Assistance:
Having device issues?
Experts are here 8am -6pm weekly to help solve your technical problems.
Fast, free replacements:
If we can’t fix your printer, we’ll try to replace it by the next business day.
No hidden fees:
Parts and labor, replacements, even return shipping — it’s all covered by your JTF Warranty.
Optional extra coverage:
Additional coverage to include supplies are available for purchase.
No Expert Install
$599.00 Expert Install
Installation Service for equipment includes the following:
JTF will schedule an appointment with one person per site. Unless otherwise requested and/or scheduled, the standard practice is to start all installation services within one week the delivery of the hardware to the customer’s location.
Unpacking: JTF will inventory the shipment against the packing list, unpack and install all delivered products.
Setup/Installation: JTF will physically assemble, connect peripherals, network cables, and power cords that were purchased from JTF.
a. This service provides installation of drivers on a single PC workstation (not server), network setup, including the programming of the IP address and network settings and verification of the network functionality, wireless connection setup and verification of the functionality over the Internet.
b. For configuration networking, the Customer can choose between automatic configuration using BOOTCP or Dynamic Host Configuration Protocol (DHCP), or manual configuration with IP address, default gateway, and subnet mask.
c. For multifunction products, the service provides setup of the ‘send to email configuration’ and configuration of the SMTP or LDAP.
d. This service provides the Customer-identified key operator with a basic overview on how to install consumables, plus explanations of basic features and functionality such as drivers, control panel features, embedded Web server, and alerts.
secure transaction
Quick Details
- Switch
- L3
- managed
- 32 x 100/200/400 Gigabit QSFP-DD + 2 x 1 Gigabit / 10 Gigabit SFP+
- front to back airflow
