HPE Aruba CX 8360-48XT4C
- Provides a unified operating model (AOS-CX) from wired campus networks to emerging edge and distributed 10/25/40/100GbE connected data centers, server racks and wiring closets.:
- Supports API-driven based, software-defined orchestration with HPE Aruba Networking Fabric Composer.:
- Supports MACsec to enable secured 10 and 25GbE connectivity in untrusted environments.:
- Intelligent monitoring and visibility with HPE Aruba Networking Network Analytics Engine.:
- High availability with VSX redundancy, and redundant power supplies and fans.:
- Advanced Layer 2/3 feature set includes BGP, OSPF, VRF, VxLAN, RoCEv2, and IPv6 at no additional software license cost.:
- High-speed Fully Distributed Architecture: The HPE Aruba Networking CX 8360 Switch Series offers multi-terabit switching capacity with line rate Gigabit Ethernet to meet the demands of bandwidth-intensive applications. | Wire speed, line rate connectivity, and flexibility for 1/10/25GbE (SFP/SFP+/SFP28) and 40/100 GbE (QSFP+/QSFP28) featured in a compact 1U form factor. | 4x10Gbps and 4x25Gbps break out from 40/100G ports offers advanced flexibility in connectivity and aggregation. | MACsec support enables secured connectivity at 10 and 25GbE speeds in untrusted environments. | Investment protection allows customers to migrate from older 1GbE/10GbE to faster 25GbE, or 10GbE/40GbE uplinks to 100GbE ports.
- Simplified IT Operations: The HPE Aruba Networking CX 8360 Switch Series simplifies network design and operations for both campus and emerging enterprise edge data centers by offering a consistent, cloud-native architecture and operating model that spans switching platforms and deployment domains. | HPE Aruba Networking AOS-CX end-to-end operating system enables a consistent operator experience across the network with full automation, security, and visibility. Tight integration into other 3rd party management stacks (HCI and Virtualized) for a seamless configuration and operational experience. | HPE Aruba Networking AOS-CX provides an always-on, resilient network operating system and infrastructure that automatically isolates software failures and provides for non-disruptive recovery. | HPE Aruba Networking Virtual Switching Extension (VSX) provides a redundant architecture in both hardware and software to facilitate no downtime—even during upgrades—across campus and data center networks.
- Accelerated Service Provisioning: The HPE Aruba Networking CX 8360 Switch Series speeds infrastructure provisioning with software-defined fabric automation and orchestration. | REST APIs and Python scripting provide fine-grained programmability. Microservices architecture enables full integration with other workflow systems and services. | HPE Aruba Networking NetEdit empowers IT teams to orchestrate configuration changes across multiple switches using intelligent automation and analytics, verifying service rollouts are consistent, conformant, and error-free. | Supports API-driven based, software-defined orchestration with HPE Aruba Networking Fabric Composer to simplify and accelerates leaf-spine network fabric provisioning across rack-scale compute and storage infrastructure.
- Increased Visibility and Control: The HPE Aruba Networking CX 8360 Switch Series provides real-time, network-wide visibility with analytics in every switch. Troubleshoot and fix problems faster with HPE Aruba Networking IOPs by automatically detecting and dynamically solving network issues before your business is impacted. | Integrated Network Analytics Engine (NAE) performs intelligent monitoring, detects problems in real time, and analyzes trends to help predict or even avoid future security and performance issues. | Support for VMware | ® | NSX seamlessly bridges physical and virtual infrastructure, delivering unprecedented performance, agility, and security for data center networks. | When used with HPE Aruba Networking Fabric Composer, administrators gain end-to-end network visibility between virtual machines, port groups, vSwitches, physical NICs, and how they are all connected to HPE Aruba Networking CX switch ports. This greatly simplifies troubleshooting of connectivity and performance problems.
| General Information | |
|---|---|
| Category | Network switches |
| Description | HPE Aruba CX 8360-48XT4C - Switch - L3 - managed - 48 x 100/1000/2.5G/5G/10GBase-T + 4 x 40 Gigabit QSFP+ / 100 Gigabit QSFP28 - back to front airflow - rack-mountable - TAA Compliant |
| Manufacturer | Hewlett Packard Enterprise |
| MSRP | $40,835.00 |
| UNSPSC | 43222612 |
| Main Specifications | |
| Dimensions & Weight / Depth | 40.64 cm |
| Dimensions & Weight / Height | 4.4 cm |
| Dimensions & Weight / Weight | 8.55 kg |
| Dimensions & Weight / Width | 44.25 cm |
| Header / Brand | Aruba |
| Miscellaneous / Product Color | Black |
| Networking / Form Factor | Rack-mountable |
| Networking / Ports Qty | 48 |
| Networking / Type | Switch |
| Packaged Quantity | 1 |
| Service & Support / Type | Limited lifetime warranty |
| Dimensions & Weight | |
| Depth | 40.64 cm |
| Height | 4.4 cm |
| Weight | 8.55 kg |
| Width | 44.25 cm |
| Environmental Parameters | |
| Humidity Range Operating | 15 - 95% (non-condensing) |
| Humidity Range Storage | 15 - 95% (non-condensing) |
| Max Operating Temperature | 40 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Interfaces |
|
| General | |
| Authentication Method | Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
| Capacity | Virtual interfaces (VLANs) per port for 802.1q: 4094 |
| Compliant Standards | IEEE 802.1t, IEEE 802.1ak, IEEE 802.1AX, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1s, IEEE 802.3ae, IEEE 802.3ad (LACP), IEEE 802.3ba, IEEE 802.3x, IEEE 802.3z, IEEE 802.1ab (LLDP), IEEE 802.1D |
| Device Type | Switch - 48 ports - L3 - managed |
| Enclosure Type | Back to front airflow rack-mountable 1U |
| Encryption Algorithm | FIPS 140-2 |
| Features | 32MB packet buffer, IPv4 support, IPv6 support, manageable, ACL support, VLAN support, Multicast routing, LACP, flow control, Link Aggregation, MSTP support, Rapid Reconfiguration of Spanning Tree (RSTP), UDP, IP-routing, ICMP, ARP support, congestion control, broadcast mode, DHCP support, port mirroring, sFlow, STP support, RSTP support, QoS, Jumbo Frames support, UDLD, fan tray, redundant hot swappable fans, packet storm protection, SP, DWRR, DCB, ECN, VSX, BFD, ERPS, Loopback, VTEP support, PIM, IGMP snooping, MLD snooping, Rapid PVST+, Cisco IPSLA, BPDU, MACsec support, MSDP, fast leave, VXLAN |
| Flash Memory | 32 GB |
| Jumbo Frame Support | 9KB |
| Performance |
|
| Ports | 48 x 100/1000/2.5G/5G/10GBase-T + 4 x 40 Gigabit QSFP+ / 100 Gigabit QSFP28 |
| Processor | 1: 1.8 GHz |
| RAM | 16 GB |
| Remote Management Protocol | RSTP, ICMP, IPv4, IPv6, SNMP, RMON, SNMP 3, SNMP 2c, TFTP, SFTP, SSH, SSH-2, CLI, NTP |
| Routing Protocol | OSPF, static IPv6 routing, static IPv4 routing, IGMP, MLD, BGP-4, BGP, static IP routing, MLDv2, OSPFv3, EGP, IGMPv2, IGMPv3, VRRP, PIM-SM, GRE, ECMP, policy-based routing (PBR), MSTP, RSTP, STP |
| Subtype | 100 Gigabit Ethernet |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - lifetime |
| Miscellaneous | |
| Compliant Standards | ISO 7779, ISO 9296, EMC 2014/30/EU, Directive 2014/35/EU, EN 60950-1:2006+A1:2010+A11:2009+A2:2013+A12:2011, EN 62368-1:2014 Second Edition, UL 60950-1, CSA 22.2 No. 60950-1, IEC60950-1:2005, Second edition + Am1:2009 + A2:2013, IEC 62368-1: 2014, EMC, CISPR 32 Class A, CISPR 35, EN 61000-3-2:2014 Class A, EN 61000-3-3:2013, EN 55032:2015, EN 55035:2017, FCC CFR47 Part 15 A, ICES-003 Class A, VCCI Class A, CNS 13438, CNS 13438 Class A, EN 60825-1:2014, IEC 60825-1:2014 Class 1, Laser Class 1, RoHS, EN 50581:2012 |
| Included Accessories | 3 fan trays |
| MTBF | 258020 hours |
| TAA Compliant | Yes |
| Power | |
| Installed Qty | 2 |
| Max Supported Qty | 2 |
| Power Device | Internal power supply - hot-plug |
| Power Provided | 550 Watt |
| Power Redundancy | Yes |
| Power Redundancy Scheme | N+1 |
| Voltage Required | AC 90-264 V (47 - 63 Hz) |
Onsite Service
Following your purchase, JTF will assign an authorized service partner in your area to your account. Your service calls are processed and dispatched in just minutes after they are received, thus minimizing your downtimes. All service partners are authorized, factory trained and 100% endorsed by JTF Network Partners, with over 600 service dealers nationwide*
Same Day Onsite Service:
Same Day Service is provided at your business or home during the contracted Maintenance period.
Exceptions:
1) Your offices are 40 miles away from the closest service providers.
2) Service in HI, AK & PR.
Convenient Assistance:
Having device issues?
Experts are here 8am -6pm weekly to help solve your technical problems.
Fast, free replacements:
If we can’t fix your printer, we’ll try to replace it by the next business day.
No hidden fees:
Parts and labor, replacements, even return shipping — it’s all covered by your JTF Warranty.
Optional extra coverage:
Additional coverage to include supplies are available for purchase.
No Expert Install
$599.00 Expert Install
Installation Service for equipment includes the following:
JTF will schedule an appointment with one person per site. Unless otherwise requested and/or scheduled, the standard practice is to start all installation services within one week the delivery of the hardware to the customer’s location.
Unpacking: JTF will inventory the shipment against the packing list, unpack and install all delivered products.
Setup/Installation: JTF will physically assemble, connect peripherals, network cables, and power cords that were purchased from JTF.
a. This service provides installation of drivers on a single PC workstation (not server), network setup, including the programming of the IP address and network settings and verification of the network functionality, wireless connection setup and verification of the functionality over the Internet.
b. For configuration networking, the Customer can choose between automatic configuration using BOOTCP or Dynamic Host Configuration Protocol (DHCP), or manual configuration with IP address, default gateway, and subnet mask.
c. For multifunction products, the service provides setup of the ‘send to email configuration’ and configuration of the SMTP or LDAP.
d. This service provides the Customer-identified key operator with a basic overview on how to install consumables, plus explanations of basic features and functionality such as drivers, control panel features, embedded Web server, and alerts.
secure transaction
Quick Details
- Switch
- L3
- managed
- 48 x 100/1000/2.5G/5G/10GBase-T + 4 x 40 Gigabit QSFP+ / 100 Gigabit QSFP28
- back to front airflow
