HPE Aruba CX 10000-48Y6C
- A category of distributed services switch with embedded programmable DPUs overcoming legacy network and security design limitations:
- CX 10000 offer 3.2 Tbps of switching capacity supporting 1/10/25GbE CX 10040 offer 8 Tbps of switching capacity supporting 32 x 100G, 6 x 400G connectivity:
- Unified network and security policy through HPE Aruba Networking Fabric Composer:
- Security ecosystem integration with third-party vendors:
- Leverage existing AOS-CX cloud-native switching:
- Distributed stateful segmentation, east–west firewalling, NAT, encryption, and telemetry services — all delivered inline:
- Improves network bandwidth and performance: The HPE Aruba Networking CX 10000 Switch Series offers a unique blend of performance and scale for distributing advanced networking and security services where it is impractical and costly to force traffic back and forth across the network to a centralized policy enforcement point. | Simplify application of services at the services network access layer edge. | All switching and routing are wire-speed to meet the demands of bandwidth-intensive applications today and in the future. CX 10000 models provide 3.2 Tbps for bidirectional switching and 2000 Mpps for forwarding. CX 10040 models offer 8 Tbps of switching capacity, 1.6 Tbps of L4 stateful inspection.
- Limit security appliance sprawl and cost: The CX 10000 series improves network bandwidth and performance by not having to trombone local traffic to a centralized chokepoint, helping to improve security posture while limiting appliance sprawl complexity and cost. | The CX 10000 series provides a compelling architectural alternative that distributes these advanced services to the data center edge, with unified network and security automation and policy management.
- Extend zero trust and microsegmentation: The HPE Aruba Networking CX 10000 Switch Series allows operators to extend industry-standard leaf-spine networking with 1.6T of distributed micro-segmentation, east-west firewalling, NAT, encryption and telemetry services delivered inline across every port closer to critical enterprise applications. | Organizations with dedicated SecOps teams can leverage Pensando | ® | policy and services manager (PSM) based on specific security roles and responsibilities for increased scalability and fault tolerance. | Extends zero trust segmentation deeper into the data center for any type of host. | Optimizes network traffic flows, bandwidth, and performance, which reduces operational complexity associated with service switching. | The switch series allow operators to extend industry-standard leaf-spine networking with distributed stateful segmentation, east–west firewalling, NAT, encryption, and telemetry services — all delivered inline, all the time, on every access port, closer to where critical enterprise applications run.
- Simplify operations: The CX 10000 series is integrated with HPE Aruba Networking Fabric Composer which provides unified network and security management, automated switch and network configurations, and unified security policy and distributed firewalls across the entire switching fabric. | The CX 10000 series integrates through Rest API, provides flow data to security and network performance tools including Advanced Security ML (XDR), Application Dependency Mapping (ADM), Network Performance Management (NPM), SIEM/SOAR, firewall compliance rules, and identity group mapping tools. | The switch series is based on the HPE Aruba Networking CX Operating System(AOS-CX), a modern, database-driven operating system that automates and simplifies many critical and complex network tasks.
| General Information | |
|---|---|
| Category | Network switches |
| Description | HPE Aruba CX 10000-48Y6C - Switch - L3 - managed - 48 x 1/10/25 Gigabit Ethernet SFP / SFP+ / SFP28 + 6 x 40/100 Gigabit QSFP+ / QSFP28 - front to back airflow - rack-mountable |
| Manufacturer | Hewlett Packard Enterprise |
| MSRP | $66,039.00 |
| UNSPSC | 43222612 |
| Main Specifications | |
| Dimensions & Weight / Depth | 51.1 cm |
| Dimensions & Weight / Height | 4.44 cm |
| Dimensions & Weight / Weight | 9.75 kg |
| Dimensions & Weight / Width | 43.82 cm |
| Header / Brand | Aruba |
| Miscellaneous / Product Color | Black |
| Networking / Form Factor | Rack-mountable |
| Networking / Ports Qty | 48 |
| Networking / Type | Switch |
| Packaged Quantity | 1 |
| Service & Support / Type | 1-year warranty |
| Dimensions & Weight | |
| Depth | 51.1 cm |
| Height | 4.44 cm |
| Weight | 9.75 kg |
| Width | 43.82 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 - 85% (non-condensing) |
| Humidity Range Storage | 5 - 95% |
| Max Operating Temperature | 40 °C |
| Max Storage Temperature | 70 °C |
| Min Operating Temperature | 0 °C |
| Min Storage Temperature | -40 °C |
| Expansion / Connectivity | |
| Interfaces |
|
| General | |
| Built-in Devices | 64 GB SSD |
| Capacity |
|
| Device Type | Switch - 48 ports - L3 - managed |
| Enclosure Type | Front to back airflow rack-mountable 1U |
| Features | REST API interface |
| Flash Memory | 64 MB |
| MAC Address Table Size | 98K entries |
| Performance |
|
| Ports | 48 x 1/10/25 Gigabit Ethernet SFP / SFP+ / SFP28 + 6 x 40/100 Gigabit QSFP+ / QSFP28 |
| RAM | 32 GB |
| Remote Management Protocol | CLI, SNMP |
| Routing Protocol | Static IPv6 routing, static IPv4 routing, RIP-2, RIPng, OSPF, OSPFv3, BGP-4, ECMP, GRE, policy-based routing (PBR), Multiprotocol BGP |
| Subtype | 25 Gigabit Ethernet |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - 1 year |
| Miscellaneous | |
| Included Accessories | 6 x fans |
| Rack Mounting Kit | Optional |
| Power | |
| Installed Qty | 2 |
| Max Supported Qty | 2 |
| Power Device | Internal power supply - hot-plug |
| Power Provided | 550 Watt |
| Voltage Required | (50 - 60 Hz) |
Onsite Service
Following your purchase, JTF will assign an authorized service partner in your area to your account. Your service calls are processed and dispatched in just minutes after they are received, thus minimizing your downtimes. All service partners are authorized, factory trained and 100% endorsed by JTF Network Partners, with over 600 service dealers nationwide*
Same Day Onsite Service:
Same Day Service is provided at your business or home during the contracted Maintenance period.
Exceptions:
1) Your offices are 40 miles away from the closest service providers.
2) Service in HI, AK & PR.
Convenient Assistance:
Having device issues?
Experts are here 8am -6pm weekly to help solve your technical problems.
Fast, free replacements:
If we can’t fix your printer, we’ll try to replace it by the next business day.
No hidden fees:
Parts and labor, replacements, even return shipping — it’s all covered by your JTF Warranty.
Optional extra coverage:
Additional coverage to include supplies are available for purchase.
No Expert Install
$599.00 Expert Install
Installation Service for equipment includes the following:
JTF will schedule an appointment with one person per site. Unless otherwise requested and/or scheduled, the standard practice is to start all installation services within one week the delivery of the hardware to the customer’s location.
Unpacking: JTF will inventory the shipment against the packing list, unpack and install all delivered products.
Setup/Installation: JTF will physically assemble, connect peripherals, network cables, and power cords that were purchased from JTF.
a. This service provides installation of drivers on a single PC workstation (not server), network setup, including the programming of the IP address and network settings and verification of the network functionality, wireless connection setup and verification of the functionality over the Internet.
b. For configuration networking, the Customer can choose between automatic configuration using BOOTCP or Dynamic Host Configuration Protocol (DHCP), or manual configuration with IP address, default gateway, and subnet mask.
c. For multifunction products, the service provides setup of the ‘send to email configuration’ and configuration of the SMTP or LDAP.
d. This service provides the Customer-identified key operator with a basic overview on how to install consumables, plus explanations of basic features and functionality such as drivers, control panel features, embedded Web server, and alerts.
secure transaction
Quick Details
- Switch
- L3
- managed
- 48 x 1/10/25 Gigabit Ethernet SFP / SFP+ / SFP28 + 6 x 40/100 Gigabit QSFP+ / QSFP28
- front to back airflow
