FORMAX FD 7500-Special 2FB Inserter w/ Tower Feeder
secure transaction
- Folder Inserter w/ Tower Feeder
- Fold Types C, Half, Z, Double Parallel and no fold
- Tower Feeder Sheet Capacity Two 1,000-sheet Flex-Feeder
- High-Capacity Feeder Up to 1,000 sheets (20#)
- Envelope Size 3.9” - 10” H x 8.9” - 13” W*
- Maximum Set Thickness Up to 72 sheets, up to .39” (10 mm)
- Maximum Insert Thickness Up to 1/4” (6mm)
- Dimensions 104” L x 59” H x 25” D
- Weight 880 lbs
- Duty Cycle Up to 300,000 pieces per month
- Voltage 110 V, 60 Hz, 10Amp
FORMAX FD 7500-Special 2FB Inserter w/ Tower Feeder
Product Type Folder Inserter Speed Up to 6,000 envelopes/hour (#10 envelopes)
Up to 12,000 sheets/hourFold Types C, Half, Z, Double Parallel and no fold Tower Feeder Sheet Capacity Two 1,000-sheet Flex-Feeder Tower Feeder Sheet Size Up to 16” L portrait feed (folding), 8.5” L landscape feed (no folding)
Up to 8.5” W portrait feeding (folding), 12” W landscape feed (no folding)High-Capacity Feeder Up to 1,000 sheets (20#) Envelope Feeder Top-loading, up to 800 standard envelopes or 500 flat envelopes (landscape orientation) Envelope Size 3.9” - 10” H x 8.9” - 13” W* Maximum Set Thickness Up to 72 sheets, up to .39” (10 mm) Maximum Insert Thickness Up to 1/4” (6mm) Dimensions 104” L x 59” H x 25” D Weight 880 lbs Duty Cycle Up to 300,000 pieces per month Voltage 110 V, 60 Hz, 10Amp
Popup Text
No Expert Install
$349.00 Expert Install
Installation Service for equipment includes the following:
JTF will schedule an appointment with one person per site. Unless otherwise requested and/or scheduled, the standard practice is to start all installation services within one week the delivery of the hardware to the customer’s location.
Unpacking: JTF will inventory the shipment against the packing list, unpack and install all delivered products.
Setup/Installation: JTF will physically assemble, connect peripherals, network cables, and power cords that were purchased from JTF.
a. This service provides installation of drivers on a single PC workstation (not server), network setup, including the programming of the IP address and network settings and verification of the network functionality, wireless connection setup and verification of the functionality over the Internet.
b. For configuration networking, the Customer can choose between automatic configuration using BOOTCP or Dynamic Host Configuration Protocol (DHCP), or manual configuration with IP address, default gateway, and subnet mask.
c. For multifunction products, the service provides setup of the ‘send to email configuration’ and configuration of the SMTP or LDAP.
d. This service provides the Customer-identified key operator with a basic overview on how to install consumables, plus explanations of basic features and functionality such as drivers, control panel features, embedded Web server, and alerts.
secure transactionFeatured
