Cisco Catalyst 4507R+E
The Catalyst 4507R+E delivers 48 gigabits per slot capacity for all line card slots, allowing the system to scale to 848 Gbps switching capacity. It is compatible with supervisor engines (supervisor engines 6-E, 6L-E, and V-10GE) and line cards, protecting investments and offering a system that is ready for services and hardware.
| General Information | |
|---|---|
| Category | Network switches |
| Description | Cisco Catalyst 4507R+E - Switch - managed - 96 x 10/100/1000 (PoE) + 2 x Gigabit SFP + 2 x combo SFP/SFP+ - rack-mountable - PoE+ - with Cisco Catalyst 4500 Supervisor Engine 7L-E, 2x Cisco Line Cards (WS-X4648-RJ45V+E) |
| Manufacturer | Cisco Systems |
| MSRP | $30,306.05 |
| UNSPSC | 43222612 |
| Main Specifications | |
| Dimensions & Weight / Depth | 31.7 cm |
| Dimensions & Weight / Height | 48.7 cm |
| Dimensions & Weight / Width | 44 cm |
| Header / Brand | Cisco |
| Networking / Form Factor | Rack-mountable |
| Networking / Ports Qty | 96 |
| Networking / Type | Switch |
| Packaged Quantity | 1 |
| Dimensions & Weight | |
| Depth | 31.7 cm |
| Height | 48.7 cm |
| Width | 44 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 - 90% (non-condensing) |
| Max Operating Temperature | 40 °C |
| Max Storage Temperature | 75 °C |
| Min Operating Temperature | 0 °C |
| Min Storage Temperature | -40 °C |
| Expansion / Connectivity | |
| Expansion Slots |
|
| Installed Modules Qty (Max) | 3 (installed) / 7 (max) |
| Interfaces |
|
| General | |
| Capacity |
|
| Compliant Standards | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3at, IEEE 802.3az |
| Device Type | Switch - 96 ports - managed - with Cisco Catalyst 4500 Supervisor Engine 7L-E, 2x Cisco Line Cards (WS-X4648-RJ45V+E) |
| Enclosure Type | Rack-mountable 11U |
| Features | Flow control, modular design, layer 2 switching, PoE, IPv6 support, half duplex mode, full duplex mode, STP support, QoS, Jumbo Frames support, MLD snooping, PoE+, IPv4 support, LACP, NetFlow, UPOE |
| Flash Memory | 1 GB |
| Jumbo Frame Support | 9216 bytes |
| MAC Address Table Size | 55K entries |
| Performance |
|
| Ports | 96 x 10/100/1000 (PoE) + 2 x Gigabit SFP + 2 x combo SFP/SFP+ |
| Power Over Ethernet (PoE) | PoE+ |
| Processor | 1: 1.5 GHz |
| RAM | 2 GB SDRAM |
| Remote Management Protocol | RMON 1, RMON 2 |
| Routing Protocol | PIM-SSM |
| Status Indicators | Port status, power, link OK, status of modules, link/activity |
| Subtype | Gigabit Ethernet |
| Miscellaneous | |
| Compliant Standards | NEBS level 3, CISPR 22 Class A, EN 60950, EN 61000-3-2, EN55022, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN 55022 Class A, UL 60950, EN50082-1, EN 61000-6-1, ACA TS001, AS/NZS 3260, FCC Part 68, JATE, CSA C22.2 No. 60950-00, ICES-003 Class A, CS-03, RoHS, FCC Part 15 A, AS/NZS 3548 Class A |
| MTBF | 248,630 hours |
| Rack Mounting Kit | Included |
| Power | |
| Power Device | Internal power supply - hot-plug |
| Power Redundancy | Yes |
| Software / System Requirements | |
| Software Included | Cisco IOS LAN Base |
Write Your Own Review
