APC NetShelter - Power distribution unit (rack-mountable)

The APC Metered Rack PDU distributes reliable power within a rack through a single input and multiple output receptacles. The AP8868US offers real-time remote monitoring of connected loads and user-defined alarms to help prevent circuit overloads that can cause accidental power loss to critical equipment. The 0U PDU includes a CS8365 input connector with 1.83m (6ft) cord, (36) IEC 60320 C13 and (6) IEC 60320 C19 output receptacles. The PDU can operate in a maximum ambient air temperature of up to 60°C (140°F) at full load. The Network Management Card provides enhanced cybersecurity with secured interfaces and modified password policy. The rack PDU integrates with EcoStruxure IT through a Network Management Card and can be accessed and configured via Web, SNMP, and Command Line Interface. User-interactive LCD interface details current, real power, voltage, and energy measurements for local user access. Embedded log memory with historical reporting enables users to meter power usage, optimize energy usage, and plan for capacity. The PDU's locking IEC outlets, when used with locking power cords reduce the probability of accidentally disconnecting cords and dropping loads. The rack PDU supports daisy-chaining of up to 4 PDUs on a single IP address. An environmental monitoring port is available for external temperature/humidity monitoring (sensor sold separately, model AP9335T or AP9335TH). The rack PDU comes with a standard two-year warranty. The metered PDU is compliant with the Trade Agreements Act (TAA) requirements.

• Yes, APC intelligent rack PDU supports remote monitoring using software such as Schneider Electric's EcoStruxure: TM | IT.
• Is this PDU UL certified?Yes, APC rack PDUs are UL certified.:
• The sales professional can assist you in designing a complete IT physical infrastructure solution that includes hardware, software and services. Begin with NetShelter: TM | racks integrated with NetShelter | TM | rack PDUs, Smart-UPS | TM | for backup power, NetBotz | TM | components for security and environmental monitoring, Aisle Containment, Cooling solutions and EcoStruxure | TM | IT for remote monitoring and administration.
• No, it does not affect the electrical output of the Rack PDU. It simply reboots the embedded Network Management Card, which will render the network port inaccessible for a short period while it reboots.:
• A firmware upgrade of the management interface will not power on/off any attached loads. The network management card will reboot during the process but will not affect the attached load.: